Industrial Chemical

EU Adds Long-Chain PFCAs and MCCPs to POPs Regulation

Updated on

EU POPS REGULATION UPDATE

The European Union has published two amendments adding long-chain perfluorocarboxylic acids (C9–C21 PFCAs), their salts and related compounds, and medium-chain chlorinated paraffins (MCCPs) to Annex I to Regulation (EU) 2019/1021 on persistent organic pollutants (POPs). Both amendments apply from 16 December 2026, with concentration limits for unintentional trace contaminants and exemptions for specified uses.

Applies from 16 December 2026C9–C21 PFCAsMCCPs

Quick Navigation

Jump to the key sections of this article.

When do the new EU POPs restrictions apply

Commission Delegated Regulation (EU) 2026/1972 covers long-chain PFCAs and was published on 12 November 2026. Commission Delegated Regulation (EU) 2026/2035 covers MCCPs and was published on 18 November 2026. Manufacturers, EU importers and product stewardship teams should check affected formulations, materials and articles against the final requirements before the application date.

AmendmentOfficial publicationEntry into forceApplies from
(EU) 2026/1972
Long-chain PFCAs
12 November 20262 December 202616 December 2026
(EU) 2026/2035
MCCPs
18 November 20268 December 202616 December 2026

Article 2 of each amendment distinguishes entry into force, on the twentieth day after publication, from the later application date. Under the Annex I framework, manufacture, placing on the market and use are prohibited unless an applicable exemption or other permitted condition is met. A use exemption must match the actual application and its conditions.

Businesses assessing product scope or exemption eligibility can refer to REACH24H's EU POPs Regulation compliance services for support with compliance assessment and regulatory interpretation.

Long-chain PFCA limits and exemptions

The PFCA entry covers linear and branched acids with the formula CₙF₂ₙ₊₁COOH, where 8 ≤ n ≤ 20, their salts, and compounds that can degrade or transform into C9–C21 PFCAs, including substances containing a CₙF₂ₙ₊₁ perfluorinated alkyl moiety (8 ≤ n ≤ 20) as a structural element. It excludes CₙF₂ₙ₊₁X compounds where X is F, Cl or Br, and PFOA-related compounds covered by the separate PFOA entry. Screening should therefore address the legal group definition, rather than rely solely on a short CAS list.

The amendment's recitals identify existing C9–C14 PFCA restrictions under REACH Annex XVII, entry 68. The new POPs entry covers the broader C9–C21 group, making C15–C21 coverage an additional point for supplier and analytical reviews.

General limits for unintentional trace contaminants

Substance groupMaximum concentrationWeight percentage
Sum of C9–C21 PFCAs and their salts0.025 mg/kg0.0000025%
Sum of C9–C21 PFCA-related compounds0.26 mg/kg0.000026%

These limits apply to unintentional trace contamination in substances, mixtures and articles. They are not general permissions to add the substances intentionally.

Fluoroplastics and PTFE micropowders

Material and concentration basisUntil 16 December 2030From 17 December 2030
Fluoroplastics and fluoroelastomers containing perfluoroalkoxy groups
Sum of the specified PFCAs
C9–C14: ≤ 0.1 mg/kg
C15–C21: ≤ 15 mg/kg
C9–C21: ≤ 0.1 mg/kg
PTFE micropowders produced by ionising irradiation or thermal degradation, including mixtures and articles for industrial and professional use containing those micropowders
Sum of the specified PFCAs and their salts
C9–C14: ≤ 1 mg/kg
C15–C21: ≤ 15 mg/kg
C9–C21: ≤ 1 mg/kg

For reference, 0.1 mg/kg equals 0.00001% by weight, 1 mg/kg equals 0.0001%, and 15 mg/kg equals 0.0015%. During production and use of the specified fluoroplastics, fluoroelastomers and PTFE micropowders, emissions of unintentionally formed C9–C21 PFCAs must be avoided or, where that is not possible, reduced as far as technically and practically possible.

Intermediates and fire-fighting foams

A combined limit of 10 mg/kg (0.001% by weight) applies to C9–C21 PFCAs, their salts and related compounds present in a substance used as a transported isolated intermediate to produce fluorochemicals with a perfluorinated carbon chain of six atoms or fewer. The substance must meet the definition in REACH Article 3(15)(c) and the strictly controlled conditions in Article 18(4), first subparagraph, points (a)–(f).

For fire-fighting foam already installed in systems for liquid fuel vapour suppression and Class B fires, the limits are 1 mg/kg for the sum of C9–C21 PFCAs and their salts and 10 mg/kg for the total concentration of C9–C21 PFCA-related compounds, whether a single compound or a combination is present. These specific limits apply until 3 August 2028.

For fluorine-free fire-fighting foam contaminated by residues originating from equipment cleaned using best available techniques, a combined limit of 10 mg/kg applies to C9–C21 PFCAs, their salts and related compounds. The cleaning and contamination conditions are part of this exemption.

Semiconductors and articles already in use

C9–C14 PFCAs, their salts and related compounds may be placed on the market and used until 30 December 2030 in semiconductors used in spare parts for, and repair of, electronic equipment placed on the market before 31 December 2023.

For C15–C21 PFCAs, their salts and related compounds, the semiconductor spare-parts exemption runs until 16 December 2031, provided those substances were initially used in the semiconductor being replaced or repaired.

Articles containing C9–C14 PFCAs, their salts or related compounds that were already in use in the EU before 31 December 2023 may continue to be used. For articles containing C15–C21 PFCAs, their salts or related compounds, the corresponding cut-off is 17 December 2026. Continued use provisions should be distinguished from permission to place new articles on the market.

MCCP limits and permitted uses

For this entry, MCCPs means substances or mixtures containing specified linear C14–C17 chloroalkanes. The molecular formulae are C₁₄H₍₃₀₋ᵧ₎Clᵧ and C₁₅H₍₃₂₋ᵧ₎Clᵧ where y ≥ 5, and C₁₆H₍₃₄₋ᵧ₎Clᵧ and C₁₇H₍₃₆₋ᵧ₎Clᵧ where y ≥ 6. The sum of these specified chloroalkanes is the concentration basis for the limits below.

The general unintentional trace contaminant limit is 1,000 mg/kg (0.1% by weight) in substances, mixtures and articles. A temporary limit of 20,000 mg/kg (2% by weight) applies until 16 December 2028 to recovered material from cable recycling, or articles made with it, only where the material or articles are used in road furniture or blocks supporting fences.

Use exemptions have different end dates

Permitted use and conditionsExemption end date
Extreme-pressure additives in heavy-duty metalworking fluids in professional or industrial settings with collection systems31 December 2036
Polymers and rubber for specified spare parts and repairs, where MCCPs were initially used in productionEnd of service life or 31 December 2041, whichever is earlier
Flexible PVC in construction wires and cables16 December 2028
Flexible PVC in wires and cables for medical devices and accessories under (EU) 2017/745, or in vitro diagnostic medical devices and accessories under (EU) 2017/74616 December 2031
Polysulfide sealants and one-component polyurethane foam for sealing doors and windows16 December 2028
One-component polyurethane foam for sealing doors and windows, containing or made from recovered material containing MCCPs, with the foam can labelled to indicate recovered material16 December 2031
Waterproof and anti-corrosion coatings16 December 2028
Adhesives and sealants for aerospace and defence; tape for non-structural bonding in those applications16 December 2031
Paints and coatings for ammunition and ammunition markings16 December 2031
Ammunition pyrotechnic defence devices to achieve specific effects; intumescent coatings and paints protecting space and defence equipment and its packaging against extreme temperatures31 December 2041
Coatings and paints for repair of, or replacement spare parts for, space and defence equipment where MCCPs were initially used in productionEnd of equipment service life

The polymer and rubber spare-parts provision covers land-based motor vehicles; agricultural, construction, forestry and landscaping machinery, including gardening machinery; electrical and electronic equipment for medical devices and accessories under Regulation (EU) 2017/745 and in vitro diagnostic medical devices and accessories under Regulation (EU) 2017/746; instruments for measurement, analysis, manufacturing, control, monitoring, testing and inspection; and aerospace and defence applications.

Articles containing MCCPs already in use in the EU on or before expiry of the relevant exemption in paragraphs 3(b)–(h) of the MCCPs entry may continue to be used. The placing on the market and use of spare parts under paragraph 3(b) of that entry that are present in the EU before 1 January 2042 is also allowed.

MCCP SDS disclosure and exposure obligations

Manufacturers, suppliers and importers of chlorinated paraffins placing substances or mixtures containing the specified chloroalkanes on the market must state their summed concentration, if present, in the safety data sheet (SDS) referred to in REACH Article 31. Where that sum exceeds 0.1% by weight, the SDS must also provide appropriate risk management measures and operating conditions to minimise releases and exposure.

Manufacturers, suppliers and importers must determine the concentration using representative batches produced by the same manufacturer to the same technical specifications and validated analytical methods. The method description and results must be available to competent authorities on request.

For manufacture and industrial or professional use covered by paragraph 3 exemptions, environmental releases must be avoided or reduced as low as possible. Worker exposure must be minimised in accordance with Article 6 of Directive 98/24/EC. An exemption therefore carries ongoing operating obligations.

Substance identifiers for supplier screening

PFCA CAS numbers include 375-95-1, 335-76-2, 2058-94-8, 307-55-1, 72629-94-8, 376-06-7, 141074-63-7, 67905-19-5, 57475-95-3, 16517-11-6, 133921-38-7 and 68310-12-3. Listed EC numbers include 206-801-3, 206-400-3, 218-165-4, 206-203-2, 276-745-2, 206-803-4, 267-638-1, 240-582-5 and 269-701-9.

MCCP CAS numbers include 85535-85-9, 198840-65-2 and 1372804-76-6; EC numbers include 287-477-0. Both entries include other substances beyond the listed identifiers. The legal definitions determine coverage.

What manufacturers and importers should do before 16 December 2026

Check substance identity and composition. Review fluorochemical inputs, PTFE-containing materials, fire-fighting foams, chlorinated paraffins and affected finished articles. Ask suppliers for information covering C9–C21 PFCAs and the specified C14–C17 chloroalkanes; a generic PFAS or chlorinated-paraffin declaration may leave gaps.

Match each product to the correct limit or exemption. Record the end use, concentration basis, dates and evidence supporting eligibility. A construction-cable exemption, for example, does not establish eligibility for every PVC product.

Review analytical evidence and SDS information. Check whether available data distinguish the required PFCA groups and MCCP components. Chlorinated-paraffin businesses should address the specific representative-batch and validated-method duties described above.

Plan supply and substitution around the applicable dates. Confirm whether continued-use provisions cover existing equipment or spare parts, and identify materials requiring replacement or further assessment before 16 December 2026 or a later exemption expiry.

Why the EU is adding these substances to POPs controls

The amendments implement the decisions taken at the Stockholm Convention's twelfth Conference of the Parties in 2025 to list long-chain PFCAs and MCCPs in Annex A, with specific exemptions. Their persistence and potential for accumulation make substance identification and contamination control relevant across supply chains. For the wider framework, see our overview of the Stockholm Convention and EU POPs controls.

How REACH24H can support your POPs assessment

REACH24H provides EU POPs compliance assessment, substance list monitoring and regulatory consulting. We can help businesses identify potential product and process gaps, interpret the applicable requirements and develop compliance improvement plans.

Assess your products before the new restrictions apply.

Contact REACH24H to discuss your PFCA or MCCP use, available composition data and the exemptions that may be relevant to your EU supply chain.

Recommended Reading

Official References

REACH24H Chemicals Compliance Team

Written by

REACH24H Chemicals Compliance Team

REACH24H

The chemicals team at REACH24H provides one-stop services, including global market access consulting, chemical registration, hazardous chemical safety assessments, and customized training. Covering markets across China, the EU, UK, North America, Russia, Turkey, Japan, South Korea, Southeast Asia, India, Australia and New Zealand, we have served over 10,000 chemical enterprises worldwide.

Newsletter Subscription

Sign up to receive event invitations, expert insights, timely news alerts, and other updates.

SUBSCRIBE

Contact Us

REACH24H USA

+1 703 596 8055

REACH24H EU

+353 1 8899 951

REACH24H UK

+44 782 7193124

REACH24H China

+86 571 87103805

REACH24H Korea

+82 2 62451610

REACH24H Japan

+03 5005 0662

REACH24H Singapore

Related Services

Events

CRAC Japan 2026: Navigating Chemical Compliance in Asia-Pacific and Emerging Markets New Chemical Registration in China: Elevating Compliance from Departmental Rules to a Comprehensive Code
Full Image

We use cookies to ensure that you have the best browsing experience on our website, analyze the relevance between you and our content, and further understand our privacy policy.