News Brief
On July 15, 2025, Brussels time, the European Commission published amendments (EU) 2025/843 to the Regulation (EU) 2019/1021. According to the amendments, UV-328 is now formally included in the controls under Annex I of the regulation.
What Is UV-328?
UV-328 is a UV stabilizer that prevents discoloration and aging of various surfaces when exposed to ultraviolet radiation. It is primarily used in paints and coatings, and as an additive in various plastics (e.g., PVC, polyester). It can also be found in LCD panels and instruments installed in vehicles, as well as in resins for interior and exterior automotive components.
Due to their persistence in the environment and potential adverse effects on human health, both substances have been listed in Annex A (Elimination) of the Stockholm Convention, which aims to stop all production and use except for specific exemptions.
Amendments to Annex I for UV-328
Substance | 2-(2H-benzotriazol-2-yl)-4,6-di-tert-pentylphenol (UV-328) |
CAS No | 25973-55-1 |
EC No | 247-384-8 |
Specific exemption on intermediate use or other specification | 1.For the purposes of this entry, Article 4(1), point (b), shall apply to concentrations of UV-328 equal to or below: |
(a)100 mg/kg (0,01 % by weight) from 4 August 2025; | |
(b)10 mg/kg (0,001 % by weight) from 4 August 2027; | |
(c)1 mg/kg (0,0001 % by weight) from 4 August 2029; | |
where they are present in substances, mixtures or articles. | |
2.By way of derogation, the placing on the market of UV-328 present in articles and the use of such articles shall be allowed for the following purposes: | |
(a)in land-based motor vehicles, until 4 August 2030; | |
(b)in industrial coating for land-based motor vehicles, engineering machines, rail transportation vehicles, and in heavy-duty coatings for large steel structures, until 4 August 2030; | |
(c)in mechanical separators in blood collection tubes, until 4 August 2030; | |
(d)in triacetyl cellulose film in polarisers, until 4 August 2030; | |
(e)in photographic paper, until 4 August 2030; | |
(f)in civilian and military aircrafts, until 4 August 2030; | |
(g)in spare parts for any of the following: | |
(i)land-based motor vehicles; | |
(ii)stationary industrial machines for use in agriculture, forestry and construction; | |
(iii)liquid crystal displays in instruments for analysis, measurements, control, monitoring, testing, production and inspection, other than for medical applications; | |
where UV-328 was initially used in their production, until the end of their service life or 31 December 2043, whichever comes earlier; | |
(h)in spare parts for any of the following: | |
(i)liquid crystal displays in devices within the scope of Regulation (EU) 2017/745, and within the scope of Regulation (EU) 2017/746 of the European Parliament and of the Council (*1); | |
(ii)liquid crystal displays in instruments for analysis, measurements, control, testing, production and inspection; | |
where UV-328 was initially used in their production, until the end of their service life; | |
(i)in spare parts for civilian and military aircrafts where UV-328 was initially used in their production, until 31 December 2030. | |
3.Articles containing UV-328 already in use in the Union before or on the date of expiry of the relevant exemption laid down in point 2(a) to (i) may continue to be used. |
Reminder from REACH24H
It is important to stay informed about the latest updates to the EU POPs Regulation, ensure proper screening and control of UV-328 in products, adjust products being exported to the EU accordingly, and fulfill all corresponding compliance obligations.
If you have any questions in this regard, please feel free to contact us at customer@reach24h.com.